To remove a pivot bracket, you will need a few tools such as a screwdriver and possibly pliers. Here are the step-by-step instructions:
1. Locate the pivot bracket: The pivot bracket is a 3/4-inch by 2-inch piece of metal that is positioned inside the corner of the track. It should be easily visible and accessible.
2. Identify the screw: Look for a screw that secures the pivot bracket to the track. It will be located at one end of the bracket. Take note of the size and type of screwdriver needed to remove it.
3. Prepare the tools: Make sure you have the appropriate screwdriver for the screw. If the screw is tight or difficult to remove, you may also want to have a pair of pliers handy to provide extra grip or leverage.
4. Loosen the screw: Insert the screwdriver into the screw head and turn it counterclockwise to loosen the screw. Depending on the tightness of the screw, you may need to apply some force or use pliers to help turn the screwdriver.
5. Remove the screw: Once the screw is sufficiently loosened, continue turning it counterclockwise until it is completely removed from the pivot bracket. Set the screw aside in a safe place where it won’t get lost.
6. Slide the bracket off the track: With the screw removed, the pivot bracket should now be free to slide off the end of the track. Gently grasp the bracket and slide it along the track until it is completely detached.
7. Inspect the bracket and track: Take a moment to inspect the pivot bracket and the track it was attached to. Look for any signs of damage or wear that may need to be addressed before reinstallation.
That’s it! You have successfully removed the pivot bracket from the track. Remember to keep the screw and bracket in a safe place until you are ready to reassemble or replace them.