What size SIM card for iPhone 6 vs iPhone 13?

Answered by John Hunt

The iPhone 6 and iPhone 13 both use different sizes of SIM cards. The iPhone 6 uses a Nano SIM card, while the iPhone 13 uses a Dual SIM with eSIM. Let’s delve into the details of each:

1. iPhone 6: The iPhone 6 was released in 2014 and was one of the first iPhones to adopt the Nano SIM card size. The Nano SIM card is the smallest SIM card size available and measures 12.3mm x 8.8mm. It is significantly smaller than the older Micro SIM and Standard SIM cards.

2. iPhone 13: The iPhone 13, released in 2021, utilizes a Dual SIM with eSIM technology. This means that it supports two SIM cards simultaneously, one physical Nano SIM card and an eSIM. The Nano SIM card slot in the iPhone 13 is compatible with the same Nano SIM card size used in the iPhone 6.

It’s important to note that the iPhone 13 doesn’t have a separate slot for the eSIM. Instead, the eSIM functionality is built into the device and can be activated through your carrier. This allows you to have two different phone numbers or plans on a single device without the need for a physical SIM card.

To switch your Nano SIM card from the iPhone 6 to the iPhone 13 mini, you’ll need to follow these steps:

1. Power off both devices: Before removing or inserting a SIM card, it’s always best to power off your devices to avoid any potential damage.

2. Locate the SIM card tray: On both the iPhone 6 and iPhone 13 mini, the SIM card tray is located on the right side of the device. It can be easily identified by a small pinhole.

3. Eject the SIM card tray: Use a SIM card ejector tool, or a small paperclip, to gently push into the pinhole on the SIM card tray. Apply a bit of pressure until the tray pops out.

4. Remove the Nano SIM card from the iPhone 6: Take out the Nano SIM card from the SIM card tray of the iPhone 6. Be careful not to touch the gold contacts on the SIM card as it can affect its functionality.

5. Insert the Nano SIM card into the iPhone 13 mini: Place the Nano SIM card into the SIM card tray of the iPhone 13 mini, ensuring that it fits snugly into the designated slot.

6. Reinsert the SIM card tray: Once the Nano SIM card is inserted, carefully slide the SIM card tray back into the device until it clicks into place.

7. Power on the iPhone 13 mini: Turn on your iPhone 13 mini and wait for it to establish a connection with your carrier. You should now be able to use your existing Nano SIM card in the new device.

It’s worth mentioning that if you want to utilize the Dual SIM functionality on the iPhone 13 mini, you can also activate an eSIM alongside your physical Nano SIM card. This can be done through your carrier, who will provide you with a QR code or activation code to set up the eSIM.

While the iPhone 6 and iPhone 13 mini both use Nano SIM cards, the iPhone 13 mini also supports an additional eSIM for Dual SIM functionality. By following the steps outlined above, you can easily transfer your Nano SIM card from the iPhone 6 to the iPhone 13 mini and continue using it without any issues.