Be Safe and Responsible by Slowing Down When Turning

Slowing down while turning is an essential skill for any driver or rider. It can be the difference between a safe and smooth turn, and a dangerous or even fatal accident. When approaching a turn, it is important to reduce your speed and be aware of any potential hazards on the road ahead.

One of the most common mistakes that drivers make when turning is going too fast. This can cause your vehicle to lose traction and slide, or even tip over in extreme cases. To avoid this, it is important to slow down before starting the turn. Start by applying the brakes gently, and gradually increase the pressure as you approach the turn. This will help you to maintain control of your vehicle and ensure that you can safely complete the turn.

Another important consideration when turning is the angle of the turn. If it is a sharp turn, you will need to slow down even more to avoid losing control of your vehicle. As a general rule, you should not exceed 10-15 MPH on a 90-degree turn. If the turn is less severe, you may be able to maintain a higher speed, but it is still important to slow down and approach the turn with caution.

In addition to slowing down, it is also important to be aware of any potential hazards on the road. This can include other vehicles, pedestrians, or obstacles in the road. By slowing down and remaining alert, you can avoid these hazards and ensure that you can safely complete the turn.

In some cases, it may be necessary to come to a complete stop before turning. This can occur if thee is a yield sign, stop sign, or other traffic control device at the intersection. If you are unsure whether you need to stop or slow down, it is always better to err on the side of caution and slow down.

Slowing down while turning is an essential skill for any driver or rider. By reducing your speed, being aware of potential hazards, and approaching the turn with caution, you can ensure that you can safely complete the turn and avoid any potential accidents or hazards on the road. Remember to always drive defensively and be aware of your surroundings, and you will be able to safely navigate any turn on the road.

Slowing Down When Turning

Slowing down when turning is extremely important for safe driving. It is necssary to reduce your speed before entering the turn to avoid losing control of your vehicle. The momentum of your car can cause it to skid or slide, which can be dangerous for you and other drivers on the road. It is recommended to start slowing down before you make the turn and continue to maintain a slow speed throughout the turn until you have fully completed it.

It is also essential to note that turning at high speeds can cause your car to overturn, which can lead to severe injuries or even fatalities. Therefore, it is crucial to take turns at a safe speed, which should not exceed 10-15 MPH on a 90-degree turn. If you are unsure about the speed limit, it is always best to err on the side of caution and take the turn slowly.

In addition to slowing down, it is also essential to turn wide, especially when turning at high speeds. Turning wide allows your car to have a more significant turning radius, which reduces the risk of your car skidding or sliding. You can achieve this by positioning your car towards the outside of the turn and gradually moving towards the inside as you complete the turn.

Slowing down when turning is crucial for safe driving. It helps you maintain control of your vehicle and reduces the risk of accidents. Remember to turn wide and maintain a safe speed when turning to stay safe on the road.

if you must slow down while turning
Source: caranddriver.com

Braking While Turning on a Motorcycle

Braking on a motorcycle while turning can be a tricky maneuver that requires skill and practice. There are two main options for stopping quickly in a curve.

The first option is to brake moderately at first and gradually increase brake force as lean angle is reduced. This technique is known as trail braking and can be effective when there is a decent amount of time and space to stop. It involves applying the brakes lightly while still leaned over, and then progressively increasing brake pressure as you begin to straighten up. Once the bike is nearly upright, you can apply the brakes fully. This technique requires a lot of finesse and control, as it can upset the balance of the bike if done incorrectly.

The second option is to straighten up the bike beore applying the brakes. This technique is generally used when there is not enough time or space to stop while leaned over. To straighten up, you need to roll off the throttle and use your body position to lean the bike upright. Once the bike is upright, you can apply the brakes in a straight line. This technique is less risky than trail braking but can take longer to stop the bike.

It’s important to note that braking while leaned over increases the risk of losing traction and crashing, especially if the brakes are applied too abruptly or forcefully. To minimize this risk, it’s crucial to use smooth, controlled inputs when braking in a curve. Additionally, it’s important to have a good understanding of the road surface, your bike’s capabilities, and your own skill level when attempting to brake while turning.

Conclusion

Slowing down whie turning is an essential skill for all drivers and riders to master. It is important to approach a turn at a safe speed and maintain a steady pace throughout the turn. Overturning or turning too wide can lead to accidents and injuries. Remember to start slowly accelerating midway through the turn and avoid exceeding 10-15 MPH on a 90-degree turn. Motorcyclists should also consider gradually increasing brake force as lean angle is reduced to stop quickly in a curve. By implementing these techniques, drivers and riders can ensure a safe and smooth turning experience. So, always remember to slow down before making any turns and stay safe on the road.

Photo of author

William Armstrong

William Armstrong is a senior editor with H-O-M-E.org, where he writes on a wide variety of topics. He has also worked as a radio reporter and holds a degree from Moody College of Communication. William was born in Denton, TX and currently resides in Austin.