To reset your iRobot Roomba i Series, follow these steps:
1. Locate the buttons: The buttons we will be using for the reset are the HOME, SPOT CLEAN, and CLEAN buttons. These buttons can typically be found on the top of the Roomba.
2. Press and hold the buttons: Press and hold the HOME, SPOT CLEAN, and CLEAN buttons all at the same time. Make sure to press them firmly and hold them down.
3. Wait for the white light ring: While still holding down the buttons, wait for the white light ring around the CLEAN button to start swirling. This swirling motion indicates that the reset process has begun.
4. Release the buttons: Once you see the white light ring swirling, you can release your fingers from the buttons. The Roomba will now start the reset process.
5. Wait for the restart: The Roomba will automatically restart to finish the factory reset. This may take a few moments, so be patient and allow the process to complete.
6. Verify the reset: Once the reset is complete, the Roomba should be restored to its factory settings. You can double-check by checking the settings and preferences on your Roomba app or by observing any changes in the behavior of the Roomba itself.
It’s worth noting that performing a factory reset will erase any saved settings and preferences on your Roomba. This means that you will need to set up your Roomba again, including connecting it to your Wi-Fi network and adjusting any custom settings you had previously configured.
In my personal experience, I have had to perform a factory reset on my Roomba i Series a couple of times. This was usually when I encountered persistent issues or connectivity problems with the device. The reset process outlined above has always been successful in resolving these issues and restoring the Roomba to its default state.
Remember to always refer to the official iRobot documentation or contact their customer support if you have any specific questions or concerns about resetting your Roomba i Series.