To get your Vizio soundbar out of demo mode, you will need to follow a few simple steps. Here is a detailed guide to help you through the process:
1. Locate the Input and Bluetooth buttons on your Vizio soundbar. These buttons are usually located on the top or front panel of the soundbar.
2. Press and hold both the Input and Bluetooth buttons simultaneously for about 10 seconds. Make sure to hold them down firmly until you see the LEDs on the soundbar start flashing.
3. After holding the buttons for 10 seconds, you will notice that all of the LEDs on the soundbar flash four times. This indicates that the demo mode has been successfully disabled.
4. If, however, the LEDs only flash once instead of four times, it means that the demo mode is still active. In this case, you will need to repeat the steps mentioned above to disable the demo mode.
5. Once the demo mode is disabled, you can release the Input and Bluetooth buttons. Your Vizio soundbar should now be out of demo mode and ready to use.
It’s worth noting that demo mode is a feature commonly found in electronic devices, including soundbars, that allows users to showcase the product’s features and capabilities. However, it can be quite annoying when you want to use your soundbar regularly.
By following the steps mentioned above, you should be able to disable the demo mode on your Vizio soundbar easily. If you encounter any difficulties or the issue persists, I would recommend referring to the user manual that came with your soundbar or contacting Vizio customer support for further assistance.
I hope this detailed guide helps you get your Vizio soundbar out of demo mode successfully.