To find your password for CenturyLink, you will need to log in to the modem’s settings interface, also known as the Modem GUI. This interface allows you to access and customize various settings for your modem.
To begin, locate your modem. The Admin Username and Admin Password are typically printed on a sticker attached to the side, back, or bottom of the modem. The sticker may also contain other important information such as the modem’s serial number and default network name (SSID).
Once you have found the sticker, take note of the Admin Username and Admin Password. These credentials are separate from your wireless network name (SSID) and WiFi password (security key), so make sure you are using the correct information.
Next, open a web browser on a device connected to your modem. This could be a computer, laptop, tablet, or smartphone. Type the default IP address for your modem into the browser’s address bar and press Enter. The default IP address for most CenturyLink modems is either 192.168.0.1 or 192.168.1.1, but it may vary depending on your specific modem model.
After entering the IP address, you should be directed to the login page of the modem’s settings interface. Here, you will need to enter the Admin Username and Admin Password from the sticker. Input these credentials in the appropriate fields and click the Login or Submit button to proceed.
If you entered the correct credentials, you should now have access to the Modem GUI. This interface provides access to various settings and configuration options for your modem, including WiFi settings, security features, and more.
If you are unable to log in or have forgotten the Admin Username and/or Admin Password, you may need to reset your modem to its factory default settings. This can usually be done by pressing and holding the reset button on the modem for about 10 seconds. However, be aware that resetting the modem will erase any custom settings you have made, so you will need to set them up again after the reset.
In summary, to find your password for CenturyLink, locate the Admin Username and Admin Password on the sticker attached to your modem. Use these credentials to log in to the modem’s settings interface by entering the default IP address in a web browser. From there, you can access and customize various settings for your modem.