How do you lock a Smonet door lock with a keypad?

Answered by Antonio Sutton

To lock a Smonet door lock with a keypad, you can follow these steps:

1. Locate the keypad: The keypad is usually found on the exterior side of the door, near the door handle or lock mechanism. It is a panel with a series of buttons or a touch-sensitive surface.

2. Press and hold the # key: To lock the door from outside, simply press and hold the # key on the keypad for approximately 2 seconds. This action will activate the locking mechanism and secure the door. It is important to ensure that the door is fully closed before attempting to lock it.

3. Verify successful locking: After pressing and holding the # key, you can try gently pulling or pushing the door to check if it is securely locked. You can also listen for any audible confirmation, such as a beep or click, that indicates the door is locked.

4. Troubleshooting: If the door fails to lock after pressing and holding the # key, ensure that the batteries powering the keypad are not depleted. Replace the batteries if necessary and try locking the door again. If the issue persists, refer to the user manual or contact Smonet customer support for further assistance.

Alternatively, if you have the TTLock App installed on your smartphone and have connected it to your Smonet door lock, you can lock the door remotely using the following steps:

1. Open the TTLock App: Launch the TTLock app on your smartphone. Ensure that you are within Bluetooth range of the door lock for successful communication.

2. Access the Padlock icon: Locate the Padlock icon within the app interface. This icon typically represents the locking function.

3. Long-press the Padlock icon: Press and hold the Padlock icon for a few seconds. This action will trigger the lock command and instruct the door lock to secure the door.

4. Confirm locking: You can verify if the door is locked by checking the app interface for any visual indication or status update. Some apps may also provide notifications or sound alerts to confirm successful locking.

It’s important to note that the TTLock App method requires a stable Bluetooth connection between your smartphone and the Smonet door lock. If you encounter any connectivity issues, ensure that Bluetooth is enabled on your phone and try moving closer to the door lock to establish a stronger connection.

Additionally, make sure that you have properly set up and configured the TTLock App with your Smonet door lock, following the instructions provided in the user manual or within the app itself.

Locking a Smonet door lock with a keypad or the TTLock App is a convenient and secure way to protect your home or property.