To clear the E1 code on a Maytag F9 washer, you can follow a few steps. First, unplug the washing machine from the wall outlet to ensure your safety. Then, let it sit for about 10 minutes to allow any residual power to dissipate. This can often help reset the machine and resolve minor issues.
After the 10-minute wait, plug the Maytag washer back into the wall outlet. Turn it on and see if it starts draining properly. In many cases, this simple reset can clear the E1 code and allow the washer to function normally again.
If the E1 code persists after the reset, there are a few other troubleshooting steps you can try. Start by checking the drain hose for any clogs or obstructions. Make sure the hose is not kinked or bent, as this can impede proper drainage. If you find any blockages or kinks, clear them and try running the washer again.
Next, inspect the drain pump filter. This filter can become clogged with lint, debris, or small objects, preventing proper drainage. Locate the filter, which is typically located at the front or bottom of the machine. Remove it and clean out any accumulated debris. Once the filter is clean, reinstall it and test the washer again.
If the above steps do not resolve the E1 code, there may be an issue with the drain pump itself. In this case, it may be necessary to call a professional technician to diagnose and repair the problem. They can inspect the pump and determine if it needs to be replaced or repaired.
In summary, to clear the E1 code on a Maytag F9 washer, start by unplugging the machine and waiting for 10 minutes. Plug it back in and check if it starts draining properly. If the code persists, check the drain hose for clogs or obstructions and clean the drain pump filter. If the issue persists, contact a professional technician for further assistance.