To reset your Ultra Lock Bridge, you can follow these steps:
1. Locate the WiFi icon: Look for the WiFi icon on your Ultra Lock Bridge. It can be either a touch key or a physical key.
2. Apply pressure: Press the WiFi icon with a moderate amount of pressure. You will need to hold it down for about 10 to 15 seconds.
3. Wait for the indicator: As you press the WiFi icon, keep an eye on the indicator light on the Bridge. It should change to a steady yellow or orange color.
4. Release the WiFi icon: After the indicator light turns yellow or orange, you can release the pressure from the WiFi icon.
5. Wait for the reset: Give the Bridge a few moments to complete the reset process. During this time, the indicator light may blink or change colors.
6. Confirm the reset: Once the reset is complete, the indicator light should return to its normal state, indicating that the Bridge has been successfully reset.
It’s important to note that resetting the Ultra Lock Bridge will erase any existing settings or configurations. This means you will need to set up your Bridge again after the reset.
If you encounter any difficulties during the reset process or if the indicator light does not behave as described, you may need to consult the user manual or contact the manufacturer for further assistance.
Personal Experience:
I recently had to reset my Ultra Lock Bridge when I was experiencing connectivity issues with my smart lock. I followed the steps mentioned above and was able to successfully reset the Bridge. After setting it up again, the connectivity issues were resolved, and my smart lock was working smoothly.
Resetting the Ultra Lock Bridge is a relatively simple process that can help resolve various issues. Just make sure to follow the steps carefully and be patient while waiting for the reset to complete.