To pair your Sena 20S to your phone, follow these steps:
1. Turn on the Sena 20S by pressing the power button. You’ll find the power button on the main unit, usually located on the side or top.
2. Once the Sena 20S is turned on, press and hold the Phone Button for about 5 seconds. You’ll see the LED on the Sena 20S start flashing red and blue alternately, and you’ll hear multiple beeps. This indicates that the Sena 20S is now in pairing mode.
3. On your mobile phone, go to the Bluetooth settings. The exact location of the Bluetooth settings may vary depending on your phone’s operating system, but it is usually found in the Settings menu.
4. In the Bluetooth settings, search for available devices. Your phone will begin scanning for nearby Bluetooth devices.
5. When the Sena 20S appears in the list of available devices, select it to start the pairing process.
6. Your phone may prompt you to enter a PIN to complete the pairing. For the Sena 20S, the default PIN is “0000”. Enter this PIN on your phone when prompted.
7. Once you have entered the PIN, your phone will confirm that the pairing process is complete. You should see a message indicating that the Sena 20S is now paired and ready to use.
It’s worth noting that the exact steps may vary slightly depending on your specific phone model and operating system. However, the general process should be similar.
If you encounter any issues during the pairing process, make sure that the Sena 20S is in pairing mode by checking the LED on the device. If it is not flashing red and blue alternately, try turning off the Sena 20S and repeating the steps from the beginning.
I hope this guide helps you successfully pair your Sena 20S to your phone. Enjoy using your Sena 20S for hands-free communication and audio playback while on the go!