To connect your Jaybird X4 earbuds to your iPhone, follow these steps:
1. Turn on your Jaybird X4 earbuds by holding down the Middle Button until you see the LED blinking green/red and hear the voice prompt saying “Ready to pair.”
2. On your iPhone, go to the Settings menu and tap on Bluetooth. Make sure Bluetooth is turned on.
3. Your iPhone will start scanning for available Bluetooth devices. After a few seconds, you should see “Jaybird X4” in the list of available devices. Tap on it to select it.
4. Your iPhone will now connect to the Jaybird X4 earbuds. Once connected, you will see a notification on your iPhone’s screen confirming the successful pairing.
5. You can now start using your Jaybird X4 earbuds with your iPhone. Play some music or make a call to test the connection.
If you have trouble connecting your Jaybird X4 earbuds to your iPhone, here are a few troubleshooting steps you can try:
– Make sure your Jaybird X4 earbuds are fully charged. Low battery can sometimes cause connection issues.
– Turn off Bluetooth on your iPhone, wait a few seconds, and then turn it back on. This can help refresh the Bluetooth connection.
– Reset your Jaybird X4 earbuds by turning them off and then holding down the Middle Button and Volume Down Button together for about 10 seconds until you see the LED flashing red.
– Forget the Jaybird X4 from your iPhone’s Bluetooth settings and then try pairing them again from scratch.
– If none of the above steps work, try connecting your Jaybird X4 earbuds to a different device, such as another smartphone or tablet, to see if the issue is specific to your iPhone or the earbuds themselves.
Remember, the exact steps may vary slightly depending on your iPhone model and iOS version, but the general process should be the same.