To clean your Breville Burr grinder, follow these step-by-step instructions:
1. Set the grind size: Locate the grind size adjustment dial on the side of the grinder. Turn it to the highest setting, which is usually marked as “16.” This will ensure that the burrs are widely spaced and easy to access for cleaning.
2. Empty the grinder: Remove any remaining coffee beans from the hopper. This can be done by either grinding them all the way through or simply pouring them out.
3. Remove the upper burr and hopper: Pull the wire handle of the upper burr upwards and twist it counterclockwise to unlock and remove it. This will also detach the hopper from the grinder body.
4. Clean the burrs: Use the provided burr brush to clean both the upper and lower burrs. Gently brush off any coffee grounds or residue that may have accumulated. Pay close attention to the nooks and crannies where coffee particles tend to get stuck.
5. Clean the grind outlet: Use the grind outlet brush, which usually comes with the grinder, to clean the outlet where the ground coffee comes out. This brush is specifically designed to reach into the small crevices and remove any remaining coffee particles.
6. Clean the hopper and lid: Wash the hopper and lid with warm, soapy water. Rinse thoroughly and dry before reattaching them to the grinder.
7. Reassemble the grinder: Place the cleaned upper burr back into the grinder body and twist it clockwise to lock it in place. Then, reattach the hopper by aligning the tabs and pushing it down until it clicks into position.
8. Test and discard: After cleaning, it’s a good idea to grind a small amount of coffee to ensure that there are no residual cleaning agents or debris left in the grinder. Discard this first batch of ground coffee.
By following these steps, you can keep your Breville Burr grinder in optimal condition and ensure that it consistently produces fresh and flavorful coffee. Regular cleaning is essential to prevent build-up and maintain the performance of your grinder.