To ensure that your RAM is properly seated in the socket, you can follow these steps:
1. Begin by visually inspecting the RAM modules in their sockets. Check that the retaining clips on either side of the modules are in the upright position. If they are not, gently push them upwards until they lock into place.
2. Once you have confirmed that the retaining clips are up, examine the alignment of the RAM modules. They should be positioned straight and flat, parallel to the motherboard. If any module appears to be at an angle or not fully inserted, it may not be seated correctly.
3. To further verify the seating of the RAM, you can use gentle pressure to ensure the modules are firmly in place. Begin by squeezing both ends of the retaining clips simultaneously towards the center of the module using your fingers. This action should firmly press the RAM down into the socket, securing it in place.
4. While applying pressure, check that the retaining clips remain in the upright position. If they start to move or release, it indicates that the RAM module is not properly seated. In this case, you may need to remove the module and reinsert it, ensuring it is aligned correctly and firmly pressed down into the socket.
5. Repeat the above steps for each RAM module installed in your system. It is important to check the seating of each module individually, as one module may be seated correctly while others may not.
By following these steps, you can ensure that your RAM is properly seated in the socket. Proper seating is crucial for optimal performance and stability of your computer system.