To bypass the clean cycle on a Maytag washer, you can follow these steps:
1. Locate the DEEP FILL and FABRIC SOFTENER buttons on your Maytag washer. These buttons are usually found on the control panel of the machine.
2. Press and hold the DEEP FILL and FABRIC SOFTENER buttons simultaneously for about 3 or 4 seconds. Make sure to press and hold them together for the required duration.
3. After holding the buttons, you should see some changes on the control panel or hear a beep, indicating that the clean cycle has been bypassed.
4. Once the clean cycle is bypassed, you can proceed to run a regular laundry cycle without the need for the clean cycle.
It’s important to note that bypassing the clean cycle means you are skipping the cleaning process for the tub. This may result in a less thorough cleaning of the machine, so it’s advisable to periodically run the clean cycle to maintain the performance and cleanliness of your Maytag washer.
If you want to ensure that the clean cycle is bypassed for future laundry loads, you can press the DELAY START button before loading the tub with your laundry. This will prevent the clean cycle from automatically starting for the next cycle.
It’s always recommended to refer to the user manual or contact Maytag customer support for specific instructions regarding your model of washer, as the button combinations and features may vary.